Safety Rules; Important Information - Claas ROLLANT 250 Repair Manual

Safety rules

SAFETY RULES

Important information

The instructions contained in this manual
should be carefully read and observed by all
persons who are concerned with the operation,
maintenance and inspection of this machine in
order to prevent accidents. In particular, read
the section "Safety rules".
The use of spare parts, accessories and
ancillary equipment other than genuine CLAAS
products or those which have been tested and
approved by CLAAS, may change the specified
design characteristics of this CLAAS machine
or detract from its functional performance, with
a possible adverse effect on the active and/or
passive operational safety of the machine and
its occupational safety standards (accident pre-
vention).
CLAAS is in no way liable for any damage or
personal injury caused through the use of other
than original or approved CLAAS parts,
accessories and ancillary equipment.
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve the
right to make changes subsequently as
technical developments continue. Respon-
sibility for errors and omissions not accepted.
IMPORTANT: Front, rear, right and left refer to
the direction of forward travel.
1.2.1
298 332.0 - RHB ROLLANT 250 / 250 RC