Safety Rules - Claas MEDION 340 Repair Manual

Safety rules

SAFETY RULES Important note
The instructions contained in this manual
should be carefully read and observed by all
persons involved with the operation, mainte-
nance and inspection of this machine in order
to prevent accidents. In particular, read the sec-
tion "Safety rules".
The use of spare parts, accessories and ancil-
lary equipment other than genuine CLAAS prod-
ucts or those which have been tested and
approved by CLAAS, may change the specified
design characteristics of this CLAAS machine
or detract from its functional performance, with
a possible adverse effect on the active and/or
passive operational safety of the machine and
its occupational safety standards (accident pre-
vention).
CLAAS is in no way liable for any damage or
personal injury caused through the use of other
than original or approved CLAAS parts, acces-
sories and ancillary equipment.
Technical data, dimensions and weights are
without obligation. CLAAS reserve the right to
make changes subsequently as technical devel-
opments continue. Responsibility for errors or
omissions not accepted.
Front, rear, right and left refer to the direction
of forward travel.
1.2.1
299 216.0 - RHB MEDION 340 - 310