Download
Share
Print this page
Claas LEXION 570 Montana Operator's Manual
  1. Manuals
  2. Brands
  3. Claas Manuals
  4. Farm Equipment
  5. LEXION 570 Montana
  6. Operator's manual
Claas LEXION 570 Montana Operator's Manual

Claas LEXION 570 Montana Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
LEXION 570 MONTANA
Operator's Manual

Advertisement

loading

Related Manuals for Claas LEXION 570 Montana

Summary of Contents for Claas LEXION 570 Montana

  • Page 1 LEXION 570 MONTANA Operator's Manual...
  • Page 2 Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 3 Introduction Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 4 Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 5 Provided all instructions regarding maintenance and care of your machine are followed, you can count on many years of reliable service. Please have your authorized CLAAS dealer carry out the recommended regular inspections. The neglecting of regular maintenance and proper machine operation lead to reduced performance and loss of time.
  • Page 6 Introduction 1.1.2 BA LEXION 570 Montana - 0299 767.0 Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 7 Contents Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 8 Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 9 Axle adjustment key pad (green) ........6.3.13 Activating ECON operating mode ........6.2.5 Calibration ..............6.3.14 Deactivating ECON operating mode ....... 6.2.5 Calibrating the inclinometer ........... 6.3.14 Calibrating the wheel rams ..........6.3.15 2.1.1 0299 767.0 - BA LEXION 570 Montana Find manuals at http://best-manuals.com/search?&s=CLA-2997670...
  • Page 10 CLAAS Autopilot Opening the tailgate ............6.6.2 (Maize picker head) ............. 6.13.1 Adjusting the gripping height Putting the CLAAS Autopilot into operation ....6.13.1 of the side panels ............. 6.6.2 CLAAS Autopilot Adjusting the side panel lock ........... 6.6.3 (Grain cutterbar) ............6.13.3 Tool cabinet ..............
  • Page 11 ......8.2.27 Returns elevator speed monitor ........8.2.67 Quick guide to accurate measuring data ....... 8.2.27 Tachometer ..............8.2.69 Yield measurement .............. 8.2.29 Calibration run ............... 8.2.69 Calibration factor ............8.2.29 2.1.3 0299 767.0 - BA LEXION 570 Montana...
  • Page 12 Removing the sieves ............9.4.3 (Switch console) .............. 9.1.7 Removing the upper sieves ..........9.4.3 Disengaging the front attachment Removing the lower sieves ..........9.4.5 (Switch console) .............. 9.1.8 Installing the sieves ............9.4.6 2.1.4 BA LEXION 570 Montana - 0299 767.0...
  • Page 13 Hydraulic system ..............10.3.1 Swinging the radial spreader Accumulators ..............10.3.1 to cutterbar trailer transport position ........ 9.6.5 Checking the oil level ............ 10.3.1 Adjusting the cross blade ..........9.6.5 Changing hydraulic oil ........... 10.3.2 2.1.5 0299 767.0 - BA LEXION 570 Montana...
  • Page 14 Cleaning the filters ............10.9.1 (LEXION 570 Montana) ..........10.8.2 Cleaning the units located in the cab roof ..... 10.9.1 Drive belts, drive chains ..........10.8.2 Cleaning the cab screens ..........10.9.2 2.1.6 BA LEXION 570 Montana - 0299 767.0...
  • Page 15 Replacing the filter cartridge .......... 11.4.4 Bleed fuel system ............11.4.4 Engine oil level check ............ 11.4.5 Engine oil change ............11.4.5 Draining used oil ............11.4.6 Oil filter ................11.4.7 Topping up engine oil ............ 11.4.7 2.1.7 0299 767.0 - BA LEXION 570 Montana...
  • Page 16 Contents 2.1.8 BA LEXION 570 Montana - 0299 767.0...
  • Page 17 General information...
  • Page 19 If the combine is equipped with a maize picker head or folding cutterbar, the regulations and require- ments of the machine's General Operating Permit must be observed, in particular the requirements concerning ballast weights and tyres. 3.1.1 0299 767.0 - BA LEXION 570 Montana...
  • Page 20 General information 3.1.2 BA LEXION 570 Montana - 0299 767.0...
  • Page 21 (accident prevention). CLAAS is in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment.
  • Page 22 General information 3.2.2 BA LEXION 570 Montana - 0299 767.0...
  • Page 23 F = Year of manufacture G = Rated capacity of combine harvester (kW) H = Authorized rear axle load = Approval no. according to ECE-R 24 J = Absorption coefficient according to ECE-R 24 (Fig. 1) 3.3.1 0299 767.0 - BA LEXION 570 Montana...
  • Page 24 General information Indicate the machine number of the CLAAS combine and when the engine, front attachments, cutterbar and maize picker are concerned, also the respective serial numbers when ordering spare parts and in case of technical questions. This is necessary as otherwise, incorrect spare part deliveries may result.
  • Page 25 The chopper serial number is provided on the left hand side panel. (Fig. 5) Cab serial number The cab serial number is located at the top of the left hand side, at the rear of the frame. (Fig. 6) 3.3.3 0299 767.0 - BA LEXION 570 Montana...
  • Page 26 General information 3.3.4 BA LEXION 570 Montana - 0299 767.0...
  • Page 27 Safety Rules...
  • Page 29 Fitting and retrofitting of ancillary equipment which is not originally manufactured by CLAAS, and, in addition, also modifications and changes may only be carried out with the consent of CLAAS, as any NOTE! such actions may have considerable adverse Sign to indicate instructions for a more effects on the safety and operational function of efficient and economic use of the machine.
  • Page 30 These 4. Never leave the operator's platform when instructions apply analogously for all other driving. attachments! 4.1.2 BA LEXION 570 Montana - 0299 767.0...
  • Page 31 9. When carrying a cutterbar along during travel With valve-controlled hydraulic accumulators on public roads and lanes, the finger bar and/or – as for example on the CLAAS Autopilot – the crop lifters must be covered. first slacken the short-circuit bolt before carrying out any repair work at the hydraulic accumulator.
  • Page 32 Prior to putting the machine into operation, the fire extinguisher must be installed on the left-hand side of the operator's platform, next to the cab. (Fig. 3) 4.1.4 BA LEXION 570 Montana - 0299 767.0...
  • Page 33 Always position the wheel chocks so that the machine cannot roll away. Completely open the wheel chocks and place as close to the traction wheels as possible. (Fig. 6) 4.1.5 0299 767.0 - BA LEXION 570 Montana...
  • Page 34 Even a pin head-sized hole may cause serious injury. ☞ If liquid has penetrated your skin, you must consult a doctor immediately. Let a specialist treat you if possible. 4.1.6 BA LEXION 570 Montana - 0299 767.0...
  • Page 35 Slacken off lock nut and back off screw (S) slightly until the oil pressure has been relieved. Then tighten screw (S) again up to the stop and tighten lock nut. (Fig. 9) 4.1.7 0299 767.0 - BA LEXION 570 Montana...
  • Page 36 The oil pressure can be read on the pressure gauge (M). Then tighten screw (S) again up to the stop and tighten lock nut. (Fig. 10, 11, 12) 4.1.8 BA LEXION 570 Montana - 0299 767.0...
  • Page 37 Wrap a thick rag around the union nut. ☞ Slacken off the union nut by a quarter turn and slightly tilt the line until the oil has escaped. ENVIRONMENT! Dispose of oil properly. (Fig. 13, 14) 4.1.9 0299 767.0 - BA LEXION 570 Montana...
  • Page 38 Wrap a thick rag around the union nut. ☞ Slacken off the union nut by a quarter turn and slightly tilt the line until the oil has escaped. ENVIRONMENT! Dispose of oil properly. (Fig. 15, 16) 4.1.10 BA LEXION 570 Montana - 0299 767.0...
  • Page 39 These safety decals, their placement on the machine and a brief explanatory text are shown on the following pages. The CLAAS part number of every decal is stated ahead of the text. The figure in ( ) refers to the adjacent picture and indicates the correct location of the safety decal on the machine.
  • Page 40 Safety Rules Safety Rules 0514 038.2 (1) Stay outside of the hazard area when machine is sus- pended. (Fig. 1, 2, 3) 4.2.2 BA LEXION 570 Montana - 0299 767.0...
  • Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...