Safety Rules; Important Notice - Claas LEXION 480 Repair Manual

Safety Rules

SAFETY RULES
188 678.1 - RHB LEXION 480

Important notice

The instructions contained in this manual
should be carefully read and observed by all
persons involved with the operation, mainte-
nance and inspection of this machine in order to
prevent accidents. In particular, read the section
"Safety rules".
The use of spare parts, accessories and
ancillary equipment other than genuine CLAAS
products or those which have been tested and
approved by CLAAS, may change the specified
design characteristics of this CLAAS machine
or detract from its functional performance, with
a possible adverse effect on the active and/or
passive operational safety of the machine and
its occupational safety standards (accident
prevention).
CLAAS is in no way liable for any damage or
personal injury caused through the use of other
than original or approved CLAAS parts, acces-
sories and ancillary equipment.
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes subsequently as
technical developments continue.
Responsibility for errors or omissions not
accepted.
Front, rear, right and left refer to the direction of
forward travel.
Safety Rules
1.2.1