Safety Information; Intended Use; Warranty And Liability; Personnel - Bender ISOMETER IR1575H Manual

1

Safety information

1.1

Intended use

The ISOMETER® is intended for:
• monitoring the insulation resistance of IT systems
Any other use, or use which goes beyond the foregoing, is deemed to be use other than for the
intended purpose. Use for the intended purpose also includes:
• compliance with all information in this operating manual and
• compliance with test intervals.
As a basic principle, our „General Conditions of Sale and Delivery" shall apply. At the latest, these
shall be available to the operator when the contract is concluded.
1.2

Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to property are excluded
if they can be attributed to one or more of the following causes:
• Use of the ISOMETER® other than for the intended purpose
• Incorrect assembly or installation, commissioning, operation and maintenance of the
ISOMETER®
• Failure to comply with the information in the operating instructions regarding transport,
commissioning, operation and maintenance of the ISOMETER®
• Unauthorized structural modifications to the ISOMETER®
• Failure to comply with the technical data
• Improperly executed repairs, and the use of spare parts or accessories which are not re-
commended by the manufacturer
• Cases of disaster and force majeure.
• Assembly and installation with device combinations not recommended by the
manufacturer
This operating manual, especially the safety information, must be observed above all by person-
nel who work on the ISOMETER®. In addition, the rules and regulations that apply for accident
prevention at the place of use must be observed.

1.2.1 Personnel

Only appropriately qualified personnel may work on the ISOMETER®. Qualified means familiar
with the installation, commissioning and operation of the product and with training appropriate
to the work. Personnel must have read and understood the safety section and warning
information in this operating manual.
IR1575H_D00416_00_M_XXEN / 03.2021
ISOMETER® IR1575H
5