Table of Contents
Advertisement
(6) Select Save set in the bottom menu to save current settings.
(7) In Android device, enter the Wi-Fi settings, select the oscilloscope access point
to connect, enter the set password.
(8) In Android device, launch the application.
(9) Click connect on the left.
(10) Set IP and Port to the same value as the setting in the oscilloscope. Click
Confirm to connect. Click History to recall the history settings.
Multicomp-Pro user Manual
110
Advertisement
Table of Contents
Need help?
Do you have a question about the MP720644 and is the answer not in the manual?