4. Changing the pressure springs
For changing the pressure spring the following steps have to be carried out:
1. Always reset the spring tension to zero.
2. The handhold has to be separated from the head.
3. Change the pressure spring: hold the handhold vertical, so that the
pressure spring will fall down. Then put the desired pressure spring e.g.
red pressure spring with the colour first into the sleeve.
4. Tighten the handhold with the head.
1. reset to zero
white pressure spring
last update: 03.06.2011
handhold
3. inserting: colour first
2. separate against
clockwise direction
page 9