3.1
Installation of Spacers and Heat Shield
To complete the fireplace, spacers and heat shield must be secured to the top of the appliance.
These parts are required to maintain proper clearances to combustible materials. You will find
the spacers, heat shield and screws in the firebox (see Figure 2 and 3).
Spacers (2X)
3.1.1 Spacers
1. Fold by hand the 2 spacers like illustrated in Figure 4.
2. Align the holes of the spacers (A) with the pre-drilled holes on top of the fireplace and
secure them with the 4 screws (B) as shown in Figure 5:
Figure 2
Figure 4
Heat shield (1X)
Figure 5
8
Figure 3