Glass Care - Cleaning - Valcourt ANTOINETTE FP7CB Installation And Operation Manual

Here are the steps to replace the glass of
your FP7CB Antoinette fireplace (Figure
43):
1. Open the glass door (A) with the lock
located on right side of the glass door.
2. Remove all the rivets (C) holding the
door.
3. Remove all debris from the frame.
4. Use only 3/16" (5 mm) ceramic glass.
5. Slide the new window into the frame
(B) and fasten it in place with 1/8" pop
rivet (C) through the glass retainers
(D).
6. Handle the glass with care to avoid
injury.
NOTE: Never use substitute parts. Use
only Valcourt brand parts.
7.8 Glass Care – Cleaning
The FP7CB ANTOINETTE WOOD FIREPLACE is designed to keep the glass clean under
normal operating conditions. To clean the glass, there are a number of specially designed
cleaners. Your authorized Valcourt dealer can recommend a suitable cleaner which is available
in your area. Regular household glass cleaners will not clean creosote and they usually contain
ammonia that may stain the glass permanently.
WARNING: ONLY WASH THE GLASS WHEN IT'S COLD.
WARNING: DO NOT USE ABRASIVES SUCH AS STEEL PADS, STEEL WOOL OR
WARNING: DO NOT USE MATERIALS OTHER THAN THOSE LISTED IN THE
OVEN CLEANER AS THEY WILL SCRATCH THE GLASS.
REPLACEMENT PARTS SECTION DURING INSTALLATION AS
THEY MAY BE SAFETY HAZARDS AND A FIRE COULD RESULT.
Figure 43
53