Masonry Trim - Valcourt ANTOINETTE FP7CB Installation And Operation Manual

1. Once the fireplace is fully installed, push the faceplate (C) against the non combustible
material, which must be installed on the front of the fireplace.
2. Secure the faceplate (C) to the fireplace with 4 screws (B) supplied with the fireplace.
Always make sure the faceplate is squared to the fireplace.
3. Make sure that the doors still slide perfectly.

3.8.2 Masonry Trim

WARNING: THE PLATING OF THE MASONRY TRIM SHOULD NEVER COME IN
CONTACT WITH MASONRY PRODUCT SUCH AS MORTAR, ACID
OR ANY OTHER PRODUCTS CONTAINING ABRASIVES. DAMAGES
AND DISCOLOURATION CAUSED BY THESE PRODUCTS WILL
VOID THE WARRANTY.
Figure 27
Narrow Overlap
29