inVue OneKEY Manual page 6

Section 5b: Legacy
20a 20a
OneKEYs
If Legacy is selected, you will receive
this screen. Select "Contact InVue"
for configuration assistance. When
prompted, select "Proceed".
Section 5bii: IR3
22a 22a
If currently using the IR3 version
contact InVue Customer Service
to obtain a new IR2 Programming
Station (PK4401) and power supply
(PS512). Plug the power supply into
the NEW Programming Station.
Note: If currently using IR3 keys with
an IR2 Programming Station, use the
existing station.
Section 5bi: IR2
21a 21a
Once charged, remove a OneKEY
from the charger.
22b 22b Place an IR3 OneKEY with the
existing store code onto the
Programming Station and press
the button on the key to transfer
the store code.
Place the Key onto the contacts on
21b 21b
the OKM.
22c 22c Place a new IR4 OneKEY onto the
Programming Station and press the
button on the key to retrieve the store
code from the Programming Station.
If you receive this screen Proceed to
21c 21c
Section 6.
If you do not receive this screen,
please contact InVue Customer
Service for further assistance.
22d 22d Place the coded IR4 OneKEY into the
OKM.