inVue LIVE LL101 Quick Start Manual

LIVE Slider Lock LL101
1 Optional:
For ease of installation, use an
Installer Key (if you have one)
to unlock the lock. If using the
Installer Key in a lock with the
battery tabs in place, it will pause
the lock in an unlocked state.
5 Lightly tighten the 2 screws to
hold the strike plate in place.
2 Use the provided alcohol wipe
to clean the edge of the BACK
panel where the strike plate
will be mounted. Allow it to dry
completely.
6 Pull the red tab to expose the
adhesive.
Note: Back the screws off slightly
if the tab is not easy to pull.
3 Back the 2 plastic screws out to
allow it to fit over the panel.
7 Fully tighten the screws.
1
4 Place the strike plate onto the
back panel.
8 Slide the panels into the closed
position. The strike plate should
emerge from between the 2
panels.
For technical assistance call
NA / LATAM // 704.752.6513 • 888.55.INVUE
EMEA // +31.23.8900150
APAC // +852.3127.6811