inVue OneKEY Manual page 4

Once successfully connected, the
13 13
OKM will update the settings. At this
time, the OKM will appear in Access
Manager. Log in to that platform to
continue the installation.
Match that to the corresponding
15b 15b
entry in Access Manager.
Once logged in to Access Manager, select the KAS/OKM icon on the left hand side of the
14 14
screen.
Ensure that the OKM is both Connected and Linked to the site. Return to the OKM to finish
16 16
setup.
Locate the MAC address on the back
15a 15a
side of the OKM, near the ethernet
port.
Section 4: Create New Site
17a 17a
Code
You will then be asked if you are
already using an InVue Onekey at
your site. Select "No" for a new
installation. Select "Yes" To transfer
a code from an existing key (See
Section 5).