inVue OneKEY Manual page 5

Select "Yes" to have the OKM create
17b 17b
a site code.
Section 5a: IR4
19a 19a
If IR4 is selected, you will be
prompted to place an existing key
onto the OKM.
The OKM will then generate a site
17c 17c
code. You can proceed to section 6.
Once charged, remove a OneKEY
19b 19b
from the charger.
Section 5: Transferring an
18a 18a
Existing Site Code
You will then be asked if you are
already using an InVue Onekey at
your site. Select "Yes" if already
using a OneKEY (any generation) at
your site.
Place the Key onto the contacts on
19c 19c
the OKM.
Select which OneKEY you are using.
18b 18b
IR4 will be for adding or replacing
new OKMs. Legacy (IR2 or IR3) for
existing IR ecosystems. Transferring
site codes from existing IR
ecosystems is covered in Sections
5b.
If you receive this screen Proceed to
19d 19d
Section 6.
If you do not receive this screen,
please contact InVue Customer
Service for further assistance.