Komatsu WA380-8 Operation & Maintenance Manual page 32

Wheel loader
Hide thumbs Also See for WA380-8:
Table of Contents

Advertisement

SAFETY LABELS
Caution for modification of ROPS/FOPS
"09620-A2001"
"09620-A3001"
If any modification is applied to the ROPS or FOPS, it may
affect the strength and may not be comply with the stand-
ard. Do not drill, cut, or weld on the ROPS or FOPS struc-
ture. Any modification is prohibited.
ROPS or FOPS may provide less protection if it has been
structurally damages or involved roll-over. Consult Komat-
su Distributor in that case.
Always wear seat belt when moving.
Prohibition of start by short-circuiting
"09842-A0481"
Start the engine only after sitting down in the operator's
seat.
Do not attempt to start the engine by short-circuiting the
engine starting circuit. Such an act may cause a serious
bodily injury or fire.
Caution for high-temperature turbocharger
"09817-A0753"
Sign indicates a burn hazard from touching heated parts,
such as engine, motor, or muffler during or right after oper-
ation.
Never touch when hot.
Caution for hot exhaust pipe
"09817-A0753"
Sign indicates a burn hazard from touching heated parts,
such as engine, motor, or muffler during or right after oper-
ation.
Never touch when hot.
Caution for high-pressure common rail
"6271-81-2980"
Do not open high pressure fuel system with engine run-
ning. Engine operation causes high fuel pressure.
High pressure fuel spray can cause serious injury or death.
2-12
SAFETY

Advertisement

Table of Contents
loading

Table of Contents