Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
REMARK
•
To cancel the kickdown, operate the directional lever. In the manual shift mode, the kickdown can also be
canceled by setting the gear speed switch to a position other than the 2nd.
•
When the starting switch is turned to OFF position and then to ON position again while the gear speed is
kicked down, the kickdown is canceled.
•
Even if the auto-kickdown is enabled, the downshift or the change to P mode with this kickdown switch is
enabled.
•
In the auto-shift mode, if the travel speed increases after a kickdown, the gear speed is shifted up automati-
cally.
•
In the auto-shift mode, when the travel speed is above 14 km/h in 3rd gear speed or above 26 km/h in 4th
gear speed, the gear speed is not shifted down to prevent the engine from overrunning even if the kickdown
switch is pressed.
MONITOR BRIGHTNESS SELECTOR SWITCH
The monitor brightness selector switch is used to select the
brightness (luminosity) of the machine monitor and rear view
monitor while lamp switch is turned ON.
When operating the machine with the headlamp lighting up dur-
ing the day, if this switch is set to Day mode, monitor screen
does not loose the brightness.
(A) Day position
The monitor screen is set to the day mode.
(B) Night position
The monitor screen is set to the night mode.
REMARK
When the lamp switch is turned to OFF position, operating this switch does not change the brightness.
For the fine adjustment method of brightness of the machine monitor, see "SCREEN ADJUSTMENT (3-81)".
For the fine adjustment method of brightness of the rear view monitor, see "BRIGHTNESS ADJUSTMENT
SWITCH OF REAR VIEW MONITOR (3-98)".
BRIGHTNESS ADJUSTMENT SWITCH OF REAR VIEW MONITOR
The brightness adjustment switch of rear view monitor is used
to adjust the brightness of the rearview monitor.
If you release your hand from the switch, it automatically re-
turns to its original position.
The brightness in the day and night modes can be adjusted in-
dividually.
Position (A)
The rearview monitor becomes brighter.
Position (B)
The rearview monitor becomes darker.
3-98
OPERATION
Advertisement
Chapters
Table of Contents
