Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
Select "Rearview Monitor Setting" on the "Monitor Setting"
menu screen, and press ENTER switch (1).
Reference line display
The is used to change ON/OFF of the reference line on the rearview monitor.
1.
Select "Guide Line Display Mode" from the "Rearview
Monitor Setting" menu, and press ENTER switch (1).
2.
Select "ON" or "OFF", then press ENTER switch (1).
"ON"
Displays the reference line.
"OFF"
Hides the reference line.
REMARK
For the rearview monitor and the reference line, see "HANDLE
REAR VIEW MONITOR (3-132)" and "METHOD FOR AD-
JUSTING REAR VIEW CAMERA ANGLE (3-178)".
This setting is held even if the starting switch is turned to OFF position.
The default is "ON".
REVERSE-INTERLOCK ENABLED MODE
In this mode, display method of rear view monitor can be changed by switching ON/OFF.
3-78
OPERATION
Advertisement
Chapters
Table of Contents
