OPERATION
METHOD FOR CLOSING REAR FULL-LENGTH FENDER AND ENGINE SIDE
COVER
1.
Close cover (1).
2.
Pull down engine side cover (2).
3.
Raise lock lever (3) and turn it, then lower the lock lever at
FREE position (F).
Rear full-length fender (4) is unlocked.
4.
Hold handle (5) of rear full-length fender (4) and slide it in-
ward, and return the rear full-length fender to its original
position.
GREASE PUMP HOLDER
(if equipped)
The grease pump is installed to the holder in the toolbox on the
inside of the left step of the machine. After using the pump,
wipe off the grease from its outside, and install it in position.
Insert the grease pump into the holder and fix it with the rubber
band.
FIRE EXTINGUISHER
(if equipped)
EXPLANATION OF COMPONENTS
3-125