OPERATION
1.
Position protrusion (2) of towing pin (1) with groove (3) of
the counterweight, and insert it.
2.
Turn towing pin (1) clockwise and set handle bar (4) of
towing pin (1) on notch (5).
3.
Fold down handle (6) of towing pin (1).
4.
When removing it, perform the procedure in the reverse or-
der.
TOOL BOX
(if equipped)
The toolbox is inside the step on the left of the machine.
METHOD FOR OPENING AND CLOSING REAR FULL-LENGTH FENDER AND EN-
GINE SIDE COVER
(Right and left)
METHOD FOR OPENING REAR FULL-LENGTH FENDER AND ENGINE SIDE
COVER
EXPLANATION OF COMPONENTS
3-123