Resetting The Remote Maintenance Device - AT&T Lucent Technologies MERLIN LEGEND Installation And Upgrade

Resetting the System
Resetting the Remote Maintenance
Device
You should reset the RMD only if instructed by the BCS National Service
Assistance Center (NSAC). Typically, you will be asked to reset the RMD if the
modem does not answer.
!
WARNING
This procedure should be performed by qualified technicians only.
To reset the RMD, press the RMD Reset button located on the MERLIN
LEGEND MAIL module. You can use a straightened paper clip or pen point to
press the RMD Reset button.
E-2
: