Sharp SD-2060 Key Operator's Manual page 10

KEY OPERATOR PROGRAMS
P13 Billing Clear Mode
Program P13 is used to clear all audit accounts or to selectively clear
individual accounts.
When P13 is entered, the following message will appear.
8
Downloaded from: http://www.usersmanualguide.com/
I I
To display the cost of a particular account
1. Press key 2.
The following message will appear.
<P017>
INPUT ACCOUNT NUMBER TO BE DISPLAYED
AND PRESS START.
ACCOUNT NUMBER
–––––
2. Enter the account number and press the START key.
The accumulated cost of copies made will be displayed.
3. Continue with step 2 for other account numbers.
Press the PROGRAM key to exit the program.
<P018>
P13: BILLING CLEAR MODE.
1.ALL ACCOUNTS.
To clear all accounts
Press key 1.
To clear a single account
1. Press key 2.
The following message will appear.
<P019>
INPUT AN ACCOUNT NUMBER TO BE CLEARED.
ACCOUNT # –––––, PRESS START TO CLEAR.
2. Enter the account number to be cleared.
3. Press the START key.
4. Continue with steps 2 and 3 for other account num-
bers. Press the PROGRAM key to exit the program.
BILLING
–––––
2.SINGLE ACCOUNT.