Huawei FusionModule1000A20 Product Description page 55

FusionModule1000A20 Prefabricated All-in-One Data
Center
Product Description (380 V)
Item
SW Button
Table 3-22 ECC800 RF_Z parameters
Item
RF_Z Operation Frequency
RF_Z EIRP (max.)
4G Operation Frequency
4G EIRP (max.)
3G Operation Frequency
3G EIRP (max.)
Software version
Indicators
Table 3-23 Indicators on the ECC800 main control module
Indicato
r
RUN
Issue 01 (2019-10-31)
Specifications
the device configuration data and historical data.
⚫ Restores to the default IP address.
⚫ Supports RF_Z networking.
Color Name
Green Running status
indicator
Copyright © Huawei Technologies Co., Ltd.
Specifications
2405 MHz–2480 MHz
5 dBm
LTE (FDD): BAND1, BAND3, BAND5, BAND8
LTE (TDD): BAND38, BAND39, BAND40,
BAND41
DC-HSPA+/HSPA+/HSPA/UMTS:BAND1,
BAND5, BAND8, BAND9
TD-SCDMA: BAND34, BAND39
GSM/GPRS/EDGE:900/1800MHz
23 dBm
WCDMA BAND: 850 MHz–2100 MHz
GSM: 850 MHz–1900 MHz
36 dBm
V100
Status Description
Steady on The power supply is normal, the
program is being loaded.
Off The power supply is abnormal.
Blinking at The software runs properly (the
long indicator blinks at 0.5 Hz, on for
intervals 1s and then off for 1s) or the
ECC800 registers with the
NetEco successfully.
Blinking at The ECC800 does not register
short with the NetEco (the indicator
3 System Architecture
49