Huawei FusionModule1000A20 Product Description page 63

FusionModule1000A20 Prefabricated All-in-One Data
Center
Product Description (380 V)
Specifications
Table 3-31 Access actuator technical specifications
Item
Power input
POE port
Wireless
communicatio
n
AI/DI port
DO output
DI input
RS485 serial
port expansion
Wiegand
interface
BLINK button
Address DIP
switch
E-label
Indicators
Table 3-32 Access actuator indicator description
Indicator
PWR
RUN
Issue 01 (2019-10-31)
Specifications
⚫ DC input: Terminal, with input voltage of 36–60 V DC
⚫
POE input: One POE port that complies with IEEE802.3at.
FE communication, 10/100M communications rate
One wireless communication port that complies with IEEE802.15.4,
mutual backup with FE communication
Two AI/DI ports, can connect to the fire alarm and exit button
One 12 V DC power output that controls magnetic locks, terminal
One DI input port for connecting to the door status switch
Two RS485 ports (one route) with the default communications rate of
9600 bit/s, physical port cascading supported (reserved function)
Two Wiegand interfaces, 12 V DC card reader operating power output;
two routes of card readers can operate at the same time.
⚫
Press the button for less than 1 second to start blinking.
⚫ Hold down the button for 1–5 seconds to search for a network and
start networking.
⚫ Hold down the button for more than 6 seconds to clear network
parameters.
4-pin address DIP switch
Supported
Color
Green
Green
Copyright © Huawei Technologies Co., Ltd.
Name
Power input status
indicator
Communication status
indicator
3 System Architecture
Status
⚫ Steady on: The power
input is normal.
⚫ Off: There is no
power input.
⚫ Off: The power is
abnormal or the
board program is
loading.
⚫ Blinking at long
57