Tcp/Ip Configuration For Windows 7, Windows 8, Or Windows 10; Tcp/Ip Configuration For Mac Os X - Arris SURFboard TM822R User Manual

4. Double-click the
Note: If Windows requests permission to continue, click Continue.
5. Double-click
Note: If your cable provider requires TCP/IP version 6, double-click
Version 6 (TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
DNS server address
7. Click OK
TCP/IP Configuration for Windows 7, Windows 8,
or Windows 10
Follow these steps to configure the Ethernet interface on a Windows 7, Windows 8, or
Windows 10 operating system.
1. Click the
2. Select Network and Sharing Center
3. Click Change adapter settings
4. Right-click on your local area connection icon and select
Properties window.
5. Select Internet Protocol Version 4 (TCP/IPv4)
Note: If your cable provider requires TCP/IP version 6, select
(TCP/IPv6)
The TCP/IP properties window for the version you selected displays.
6. For either TCP/IPv4 or TCP/IPv6, select
DNS server address
7. Click OK
back out of the remaining setup screens.

TCP/IP Configuration for Mac OS X

Follow these steps to configure the Ethernet interface on a Mac OS X operating system.
1. Open System Preferences, either by choosing
or by clicking the System Preferences icon in the dock.
STANDARD PN 365-095-31188 x.1
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
Local Area Connection
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv6.
automatically, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window.
Start menu and type network and sharing
from the left-side menu.
and click Properties
automatically, unless instructed otherwise by your cable provider.
to accept the new settings and close the Properties window. Then click
TM822R DOCSIS® 3.0 Telephony Modem For Customers User Guide
Chapter 6: Configuring Your Ethernet Connection
to open the Properties window:
to configure TCP/IPv4.
Obtain an IP address automatically
into the Search box.
when it appears.
and click
to configure TCP/IPv6.
Obtain an IP address automatically
System Preferences
Internet Protocol
and
Properties to open the
Properties to configure TCP/IPv4.
Internet Protocol Version 6
and
from the Apple menu
Obtain
Obtain
Close to
32