Sizewise SW Rest Secure System User Manual page 23

All surfaces are to be wiped using a coarse cloth, dampened with the disinfectant solution,
prepared as directed by the manufacturer's recommendations, to remove organic material and
visible soil.
Prevent damage when cleaning electrical connections and components by avoiding excessive
moisture.
Allow all surfaces to remain wet with disinfectant solution for the manufacturer's recommended
contact time.
Rinse all surfaces with a clean cloth dampened with fresh water to remove chemical and organic
residue.
After cleaning, all surfaces are to be wiped with a clean, dry cloth to remove any moisture or
residue.
NOTE: Additional cleaning may be completed, as desired, with a mild soap solution and/or
household cleaning products. Avoid using harsh chemicals, such as acetone or paint thinner, as
they will damage the finish of the paint.
Steam Cleaning
This product must not be steam cleaned.
Scale System Components
All surfaces of the scale meter and the coiled cord are to be wiped using a coarse cloth,
dampened with the disinfectant solution, prepared as directed by the manufacturer's
recommendations, to remove organic material and visible soil.
Avoid excessive moisture to prevent damage.
Allow the scale meter and coiled cord to remain wet with disinfectant solution for the
manufacturer's recommended contact time.
Rinse all surfaces of the scale meter with a clean cloth dampened with fresh water to remove
chemical and organic residue.
After cleaning, all surfaces are to be wiped with a clean, dry cloth to remove any moisture or
residue.
Cleaning Blood and Other Excretions:
Blood and other excretions should be wiped up while wet, if possible. These substances are
more difficult to remove once they have dried to surfaces. Dried blood and other excretions are
to be removed using ample disinfectant solution in order to moisten the substance and make it
easier to clean.
22