Table of Contents
Advertisement
SETUP
COMMUNICATION
Adjust the camera's ID and Baudrate. Default Protocol is Pelco-D.
- CAM ID: Provide an ID number for the camera (0 ~ 255).
- BAUDRATE: 9600bps is default. Select the baudrate from the
following options: 2400/4800/9600/57600/115200 bps.
CAM. TITLE
Add a name to the camera. Set the title by using the OSD joystick.
IMAGE RANGE
Image Range allows you to set the proper Black and White levels
according to the external display you use.
FULL: Display all BLACK level and WHITE level without
compression.
COMP: Display BLACK level and WHITE level with compression.
USER : Reset the BLACK level by changing the OFFSET value.
27
Advertisement
Table of Contents
