Det. Window; Signal Out - Digital Watchdog DWC-V6763WTIR User Manual

MOTION
The camera can detect the movement and display an alarm on the screen when movement is detected.
MOTION
To use the motion detection settings, be fore Motion is ON.

DET. WINDOW

- Window Use: Select which zone to setup from the 4 motion zones available.
- Window Zone: Enable or disable the selected motion zone.
- DET H-POS: Move the Zone left or right. The higher the number, the zone will move to the right.
- DET V-POS: Move the Zone up or down. The higher the number, the
zone will move down.
- DET H-Size: Adjust the zone's size horizontally. The higher the number,
the right side panel will move further to the right.
- DET V-Size: Adjust the zone's size vertically. The higher the number, the
bottom side panel will move further down.
SENSITIVITY
The smaller the movement you want to detect, the higher the sensitivity value must be.
MOTION OSD
If enabled, the text MOTION ZONE will appear on the screen indicating the area of motion detection.
TEXT ALARM
Setup a text to appear on the screen when motion is detected explaining the alarm situation.
- WINDOW MOTION: Wiil appear when a motion alarm is detected.
- CAMERA MOVING: Will appear if the camera is shaken abruptly.
- BRIGHT CHANGE: Will appear if the brighness in the scene changes suddenly and drstically.

SIGNAL OUT

If enabled, the camera can trigger an output when motion is detected.
24