Digital Watchdog STAR-LIGHT Universal HD over Coax DWC-V6263TIR Quick Start Manual

Quick Start Guide
DW® Universal HD over Coax®
vandal dome cameras
DWC-V6263TIR
WHAT'S IN THE BOX
Hex Allen Mounting
1
wrench Torx Wrench DC Plug Cable template
Torx Wrench DC Plug Cable
Test Video Cable
Screws
DC plug and plastic
1
Sunshield cover &
cable anchors -
Torx Wrench DC Plug Cable Test Video Cable
Torx Wrench DC Plug Cable Test Video Cable
4pcs
Sunshield cover &
DC Plug Cable Test Video Cable Template Sheet Manual
Screw &
Moisture
Template Sheet Manual
Quick set up absorber
1
guide and absorber
guide
Screw & Moisture absorber &
Template Sheet Manual Screw &
Template Sheet Manual
Screw & Moisture absorber &
Manual
Absorber Guide
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources.
2. Search your product by entering the part number in
the 'Search by Product' search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
Attention: This document is intended to serve as a quick reference for
initial set up. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday through Friday
STEP 1 – PREPARING TO MOUNT THE CAMERA
1. The mounting surface must withstand five times the camera weight.
2. Pay attention to the cables. The can easily become caught and damaged.
Any damage may cause a short or fire.
3. Install the moisture absorber in the base of the camera's lens.
a. Remove the moisture absorber from the packaging.
b. Cut the card and folder along the dotted line.
c. Place the moisture absorber behind the camera's lens module. See drawing for more
information.
4. Detach the camera's dome cover by loosening the four (4) screws on each side of the
dome.
5. Remove the dome protection film before placing the dome back on the camera base.
6. Using the mounting template sheet or the camera itself, mark and drill the necessary holes
in the wall or ceiling.
Torx Wrench DC Plug Cable Test Video Cable
Sunshield cover & 1
Test Video Cable
Sunshield cover &
Screw &
Template Sheet Manual
1 set
Sunshield cover &
Screw & Moisture absorber &
Absorber Guide
Moisture absorber &
Absorber Guide
1
Moisture absorber &
Absorber Guide
Absorber Guide
STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES
Pass the wires through the mount bracket and make all necessary connections. Connect the BNC cable and power cables to the camera.
12VDC ONLY!
CAUTION! The camera supports DC power supply only
digital-watchdog.com
Sunshield cover &
Absorber attachment point
Moisture absorber &
Absorber Guide
Please cut the card type absorber along
a dotted line, overlap and attach them
according to the direction of the arrow.
Power Requirements
Quick Start Guide
Protective sheet
Protective film
Power Consumption
DC12V (LED off): 1.86W
DC12V (LED on): 3.6W