Fuse For Rf Remote Control Circuit; Training The End-User; Maintaining The Lift - Harmar Mobility AL625HD Installation & Owner's Manual

FUSE FOR RF REMOTE CONTROL CIRCUIT

If the Remote Control is not working, check the fuse to see if it is blown. Replace the fuse if necessary. If the
Remote Control unit still does not function, there may be another problem with the Tracker - check the operation of
the Tracker using the hand held pendant.

TRAINING THE END-USER

- Review all of the SAFETY ISSUES.
- Explain how the Lift is wired.
- Explain the location and operation of the self-resetting fuse in the electrical circuit.
- Review the operation of the lift as described in the USER'S MANUAL.

MAINTAINING THE LIFT

a) CLEANING: KEEP THE TRACKS CLEAR OF FOREIGN OBJECTS Even small stones/gravel inside
the tracks can interfere or stop the operation of your Tracker
b) Inspect the straps for wear or fraying with each use.
c) Inspect the side-to-side clearances and over the bumper & threshold clearances with each use.
d) MONTHLY: Check all mounting hardware for tightness and signs of wear due to vehicle aging, rust, etc.
e)
TWICE A YEAR: Lubricate the lead screw with a small amount of wheel bearing grease. Lubricate all bearing
points and moving parts using wheel-bearing grease.
AL625 & AL625HD
REV: 1-24-12
Page 21