Harmar Mobility AL625HD Installation & Owner's Manual page 19

STEP 12
INSTALLING THE STRAPS FOR THE CUSTOMER'S POWER CHAIR/SCOOTER
Buckle (above) Latch Plate & Adjustable Strap (below)
In general, Power Chairs will use straps mounted near the center of the platform, and for Scooters the straps will be
mounted off to one side. Locate the straps on the platform where they will be able to buckle across the seat of the
customer's power chair or scooter.
Note: It is strongly recommended that the buckle be attached to the side closest to the vehicle (van, minivan) so that
the adjustable strap is easy to reach.
POWER CHAIR SCOOTER
Installing Straps in the Center Positions
Installing the side near the trolley assembly. Use 5/16 – 18 x 1" Button Head Socket Screw, 5/16 – 18 nylon insert
lock nut, and one 5/16 SAE flat washers.
AL625 & AL625HD Page 19
REV: 1-24-12