ICP DAS USA ET-8KP4-MTCP Quick Start Manual page 8

iii. Click the Monitor icon to start retrieving I/O values. The I/O values will
be displayed in the Mapping tables
iv. Select File option from the Save menu and select a location where the
configuration file is about to be saved. This operation can save the controller
configuration and I/O settings to an "ini" file, and the file can be loaded by Load
function at the next time when using the same controller and I/O modules
iv. Click File to save the
configuration file
P. 8
Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved.
8