Installing The Modbus Utility; Using The Modbus Utility To Assign A New Ip Address - ICP DAS USA ET-8KP4-MTCP Quick Start Manual

3

Installing the Modbus Utility

The Modbus Utility can be obtained from companion CD or ICP DAS FTP
site:
CD:\Napdos\Modbus\Modbus_Utility\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/modbus_utility/
4

Using the Modbus Utility to Assign a New IP Address

UDP Search of the Modbus Utility can be used to configure the IP address. Before
starting the configuration process, ensure that the LAN1 are used to connect to network
and make the controller under the running firmware mode. The default IP addresses
are as follows:
Item
IP Address
Subnet Mask
Gateway
Step 1: Run the Modbus Utility, and then search the ET-8KPn-MTCP
i. Double-click the Modbus Utility shortcut on the desktop
ii. Select UDP Search from the Client Tools menu
iii. Click the Search Servers button of the eSearch Utility dialog, waiting for
the search to be done
Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved.
LAN1 (default)
192.168.255.1
255.255.0.0
192.168.0.1
ii. Select UDP Search
iii. Click the Search Servers button,
waiting for the search to be done
P. 3
3