Maintenance And Repairs; Safety Regulations; Maintenance; Cleaning The Resistive Touchscreen - Eaton XV100 Manual

7
7.1
7.2
7.2.1
7.2.2
7.2.3

Maintenance and repairs

Safety regulations


Read Chapter 3 Safety regulations,  13, before working with the device. This contains
important information for your personal safety.

Maintenance

Devices with resistive touch are maintenance-free. However, the following work may be necessary:
Cleaning the resistive touchscreen when soiled.

Recalibrating the resistive touchscreen if it stops responding correctly to touch.


Cleaning the resistive touchscreen

CAUTION
Cleaning the device
Damage to the device due to the use of pointed or sharp objects or by liquids.
Do not use any pointy or sharp objects (e.g., knives) to clean the device.

Do not use aggressive or abrasive cleaning products or solvents.

Prevent liquids from getting into the device (short-circuit hazard).

1 Carefully clean the resistive touchscreen with a clean, soft, damp cloth.
If there are any spots that are proving difficult to get off, spray a little dishwashing liquid on the

damp cloth first.

Recalibrating the resistive touchscreen

The resistive touchscreen will already be calibrated when you receive it. However, it will have to be
recalibrated if it stops responding correctly to touch. Touch calibration, see Document «System
Description Windows CE MN05010007Z (operation of the Windows CE operating system on touch
displays)».

Battery

The integrated battery cannot be exchanged. Lifespan,
see Chapter 9.4 System,  69
Touch display XV-102 10/2020 MN04802004Z-EN Eaton.com
7 Maintenance and repairs
7.1 Safety regulations
59