Mounting The Device - Eaton XV100 Manual

5 Installation
5.4 Mounting
5.4.1
50

Mounting the device

1 Select the mounting position of the device as described in Chapter 5.2.3 Requirements for the
mounting position,  24.
2 Make a mounting cutout for the device at the selected location:
Mounting cutout:

3.5" devices: 123  87 mm (±1 mm)

5.7" devices: 157  117 mm (±1 mm)

7.0" devices: 197  122 mm (±1 mm)

Material thickness at the mounting cutout 2...5 mm

123.0
+1/-1
Fig.. 28 Mounting cutout for 3.5" devices
197.0
Fig.. 30 Mounting cutout for 7.0" devices
Touch display XV-102 10/2020 MN04802004Z-EN Eaton.com
+1/-1
157.0
Fig.. 29 Mounting cutout for 5.7" devices
+1/-1