Table of Contents
Advertisement
Change Riding Mode as follows:
-
Hold ENTER button depressed for 1 second.
System opens the page from which it is possible
to scroll the available Riding Modes and view
their parameters, together with the relevant
settings.
-
Use the navigation buttons to select the desired
Riding Mode.
-
Press ENTER button to confirm.
Select "Exit" and press ENTER button to quit the
Riding Mode change function without making any
changes.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
-
If speed is lower than or equal to 5 km/h (3 mph)
and throttle control is open, the message "Close
throttle" is displayed; the new Riding Mode is
confirmed and stored only when throttle control
is closed and the main screen is displayed.
-
If speed is lower than or equal to 5 km/h (3 mph),
throttle control is closed but brakes are
actuated, the message "Release brakes" is
displayed; the new Riding Mode is confirmed
Engine High
< Exit
DTC 4
ABS 3
Race
DWC 3
Sport
EBC 1
Street
DQS Up/Down
and stored only when brakes are released and
the main screen is displayed.
-
If both the previously specified conditions are
true, message "Close throttle and release
brakes" is displayed; the new Riding Mode is
confirmed and stored only when the 2
conditions are as required and the main screen is
displayed.
If either of the conditions required to validate the
change of Riding Mode are not true within 5 seconds
from activation of one of the above-described
conditions, the procedure will be aborted, the
0
km/h
Fig 15
41
Advertisement
Table of Contents
