Printing A Backlit Display From Windows - Epson Stylus Color 1520 User Manual

Printing on Special Media
Note:
If you change any other
printer software
settings, make sure the
Flip Horizontal setting is
still selected before you
print.

Printing a Backlit Display from Windows

1. Create the document in your word processor or other
application software.
2. Choose or
Print
printing dialog box for your application.
3. Make sure your printer is selected, and then click the
, ,
Printer Setup
have to click a series of these buttons, depending on your
software.) You see the Main printer settings dialog box, as
shown on page 1-2.
4. Select
Ink Jet Back Light Film
This chooses the best printer driver settings for printing on
back light film and automatically turns on the
feature so your image will appear correctly
Horizontal
when viewed from the reverse side.
5. Check the rest of the printer software settings available on
the Main menu as described in Chapters 1 and 2.
6. Click the
Paper
7. Choose the
Paper Source
(for the built-in sheet feeder) or
Feeder
(for the manual feeder).
Slot
8. Then select the size of your back light film as the
setting.
Paper Size
9. Click to save your settings and exit the printer software.
OK
10. Click ,
Close OK
(You may need to click a series of these buttons, depending
on your software.)
3-34
from the File menu. You see a
Print Setup
, or
Properties Options
as the Media Type setting.
tab.
you're using, either
, or to print your backlit display.
Print
button. (You may
Flip
Auto Sheet
Manual Feed