Epson Stylus Color 1520 User Manual page 101

Using Your Printer with DOS
Setting
Software (emulation mode)
Auto CR (IBM XL24E mode
only)
AGM (IBM XL24E mode only)
Character table
International character set for
Italic table
Auto line feed
Network I/F (interface) mode
0 slash
Page length
Skip over perforation
Options
ESC/P 2, IBM
XL24E
Off, On
Off, On
—
—
Off, On
Off, On
0
0, /
11, 12, 8.5, or 70/6
inches
Off, On
5-6
Description
Specifies the control mode you want the
printer to use. For the best font and
graphics control, always use ESC/P 2
mode. If you need to emulate an IBM
™
Proprinter, select IBM XL24E mode. For
a list of the commands for these modes,
see page 5-17.
In IBM XL24E mode, lets you select
whether the printer performs a
carriage-return line-feed operation when it
reaches the right margin (On) or only when
it receives a carriage-return code in the
print job (Off).
In IBM XL24E mode, turns high resolution,
24-pin graphics command mode on or off.
See the samples beginning on page 5-8.
The default character table is PC437.
See the samples beginning on page 5-8.
The default character set is Italic U.S.A.
Sets the printer to perform a line-feed
operation every time it receives a
carriage-return command (On), or not to
perform one (Off).
Sets whether the printer is (On) or is not
(Off) shared by more than one computer.
Selects either a slashed zero (
regular zero (0) to be printed when a zero
command is received.
When printing on continuous paper, select
the length of the individual sheets. 70/6 is
the length of A4-size paper.
If your software doesn't let you set top and
bottom margins, turn this setting On to add
a one-inch margin over the perforation to
separate text on continuous pages.
®
0
/ ) or a