Removing Continuous Paper - Epson Stylus Color 1520 User Manual

Printing on Special Media
Note:
See Chapter 5 for
information on using
default-setting mode to
change the auto tear-off
setting for your print job.

Removing Continuous Paper

When you've finished printing a continuous paper document,
you must carefully follow these steps to remove it from the
printer, depending on your media type and the setting of the
auto tear-off feature.
1. If the printer's auto tear-off feature is turned on, your
continuous paper is automatically advanced to the tear-off
position at the end of a print job. Go to step 2.
If the auto tear-off feature is turned off (the default setting),
press the button as many times as necessary to
LF/FF
advance the last printed sheet to the tear-off edge. Go to
step 2.
If the auto tear-off feature is turned off (the default setting)
and you're printing labels, tear off the next sheet of labels at
the back of the printer. Then press the
printer's control panel as many times as necessary to eject
the remaining pages forward out of the printer. Do not
perform steps 2 and 3.
3-18
button on the
LF/FF