Epson Stylus Color 1520 User Manual page 135

You see a spooling error message (Windows 95/3.1).
Possible cause
Spooling error messages or
very slow printing may be
caused by temporary files.
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.
In Windows 95, the Status Monitor box does not appear with the Despooler.
Possible cause
The Windows Print
Manager is interfering with
the Status Monitor.
A portion of your image doesn't print or you see a memory error message
(Macintosh).
Possible cause
Your system doesn't have
enough available memory.
You may need to increase
the memory allocation for
your application, EPSON
Monitor2, or both.
Your printer switches to the modem port or won't confirm on the printer port
(Macintosh).
Possible cause
Your system has extension
conflicts.
You're using an AppleTalk
cable.
Solution
Change the Spool Manager default directory, following the
instructions in Chapter 4.
Delete unnecessary files to make room on the drive.
Try one of the following:
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your monitor.
Add more memory to your computer.
Solution
Make sure Use Print Manager for this port is not checked in the
Spool Manager Queue setup. See Chapter 4 for instructions.
Solution
Close any other applications you are running or turn off
background printing.
Choose Get Info from the File menu when your application is
active and increase the memory requirements. See Chapter 4 for
more information. Or turn off background printing (you won't be
able to use Monitor2).
Solution
Make sure AppleTalk is inactive. In the Extensions Manager,
disable the AppleShare, FileShare, and PrinterShare extensions.
Set your printer and any unused printers to the printer port. Then
restart your system.
Make sure you're using a standard Apple System Peripheral-8
cable. See the specifications in Appendix C.
7-11
Troubleshooting