IBM XL24E Emulation Control Codes
In the following commands, "(AGM)" indicates Alternate
Graphics Mode commands. Do not type these characters as part
of the command.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K,
ESC U
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM), ESC 0, ESC 1,
ESC 2, ESC 3, ESC 3 (AGM), CR
Page format:
ESC C, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J,
ESC J (AGM)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G,
ESC H, ESC T, ESC S, ESC -, ESC _
Spacing:
BS, SP, ESC [ \
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM)
5-19
Using Your Printer with DOS