Note:
To print from DOS
applications as well as
Windows applications,
click the Capture Printer
Port button instead of
Add Port. Select the
printer port in the Device
list, then specify its
network path. Select
Reconnect at logon, then
click OK.
The following dialog box appears:
5. Click the
Add Port
to the printer and click
6. Open the Spool Manager window as described on page 4-2.
7. In the Spool Manager window, double-click your printer's
queue. The Queue Setup dialog box appears.
8. Make sure the
Use Print Manager for this port
checked. Then click
Network Printing on a Macintosh
If you want to use your printer on an AppleTalk
need to install an optional interface board: either the
®
LocalTalk
board or the Ethernet
more information about optional interfaces.
Then you can use the
printer in the Chooser. The
your hard drive along with the other printer software.
4-13
Managing Print Jobs and Network Printing
button, then specify the network path
.
OK
.
OK
™
board. See Appendix A for
Namer utility and set up your
EPSON
Namer was installed on
EPSON
option is
™
network, you