Epson Stylus Color 1520 User Manual page 64

Caution:
Never press Load/Eject
when you have
continuous label paper
loaded in the printer. This
would feed labels
backward, causing them
to peel off inside the
printer.
2. Tear off the printed pages at the perforation by pulling it
across the tear-off edge.
If the paper's perforation isn't at the printer's tear-off edge,
adjust the tear-off position as described on page 3-21. Do
not perform step 3.
3. Press the
Load/Eject
continuous paper backward to the paper-park position so
it's ready for printing the next time you need it.
If the ink smears on your document, set the thickness lever
to the + position and reprint; see page 3-7.
If your margins are not where you want them, adjust them
in your application software. However, if you need to
adjust your paper's loading position, you can change it
using the
Micro Adjust
instructions.
3-19
Printing on Special Media
button to feed the rest of the
buttons. See the next section for
tear-off edge