Removing Continuous Paper; Removing Continuous Paper With Labels - Epson FX-880 Quick Reference

Removing continuous paper

1. When you finish printing, press the Tear
off/Bin button to feed the paper's
perforation to the tear-off edge.
2. Tear off the printed document.
3. Press the Load/Eject button to feed the
continuous paper backward out of the
printer and into the standby position.
c
Caution:
Make sure you tear off your printed
document before pressing the Load/Eject
button. Reverse feeding several pages at a
time may cause a paper jam.

Removing continuous paper with labels

1. Tear off the fresh supply of continuous
labels at the perforation nearest the slot
where the labels enter the printer.
2. Hold down the LF/FF button to eject the
remaining labels from the printer.
c
Caution:
Never feed labels backward using the
Load/Eject or Tear off/Bin button.
Labels can easily come off the backing
sheet and cause a jam.
Note:
See Chapter 3 of your User's Guide for more information on loading continuous paper with the front or rear
push tractor, or for information on using the pull tractor.
6
Tear off the printed document at the perforation (pull
it towards you for a clean cut) before pressing the
Load/Eject button.
Tear off the unprinted labels; then hold down the
LF/FF button to eject the remaining labels.