Table of Contents
Advertisement
GLASS DOOR REMOVAL / INSTALLATION
WARNING: Do not operate the appliance with the glass
panels removed, cracked or broken. Replacement of the
glass panels should be done by a licensed or qualified
service person.
1. Insert the door tool into the side door latch.
Door Latch
2. Pull forward until the side door latch is disengaged from the door frame.
3. Push to the outside of the unit until the side door latch is below the door frame.
Door Tool
4. Release the side door latch until it reaches its resting point.
5. Support the top of door as it will fall forward after the 2nd door latch is re-
leased. The bottom of the door will be supported in the lower frame.
Note: Gently ease the glass back. Do not put any force on the glass assembly
tooltip
as this may cause damage to the lower frame and or glass frame assembly.
Lower Frame
6. Remove the door tool and repeat steps 1-4 on the opposite door latch.
7. To install the glass door - reverse steps.
LRI3E-11 / HRI3E-11 Direct Vent Gas Insert
installation
|
35
Advertisement
Table of Contents
