Table of Contents
Advertisement
BLEED SCREW
IMPORTANT
Before operating the logsplitter, the Oil Filler/Air
Bleed should be loosened a few rotations until air
can go in and out of the oil tank smoothly. Air flow
through the Oil Filler/Air Bleed hole should be
noticeable while the logsplitter is working. Before
moving the log splitter, ensure the Oil Filler/Air
Bleed is tightened to avoid oil leaks.
FAILURE TO LOOSEN THE OIL FILLER/AIR BLEED WILL KEEP SEALED AIR IN THE HYDRAULIC SYSTEM
COMPRESSED. SUCH CONTINUOUS AIR COMPRESSION WILL BLOW OUT THE SEALS OF THE HYDRAULIC
SYSTEM AND CAN CAUSE PERMANENT DAMAGE TO THE LOGSPLITTER, WHICH IS NOT COVERED UNDER THE
TERMS & CONDITIONS OF THE MANUFACTURERS WARRANTY.
TRANSPORTING YOUR LOGSPLITTER
The logsplitter is equipped with 2 wheels for minor moving. To move the log splitter to the work site. Grip the
handle to tilt the log splitter slightly after making sure the oil tank cover is tightened.
DO NOT TRANSPORT THE LOGSPLITTER WITH WOOD LOADED
Advertisement
Table of Contents
