Log Splitter Stand-THLSS-B This stand is produced to support The Handy Log splitter THLS-B Thank you for purchasing The Handy log splitter stand. Please carefully read the assembly instructions for the safety of yourself and the persons around you. PRODUCT SPECIFICATION Measure: 74x64x70cm Net Weight: 9.5kg...
Page 3
Parts List and diagram Name Main upright support leg Horizontal bars Horizontal bars Screw (M8 X 90) 4-1 Nut (M8) Screw(M8 X 15) Stand fixing for electrical motor Screw(M8 X 50) Axle and wheels Leg Supports Leg Supports Fig 2.
Page 4
Change the first sentence as follows. Remove all the parts from the carton and check against the parts list. Assemble the parts as figure 3. Connect part B with parts A and part D by screw (M8 x 15), Connect part C with parts A and part G by screw (M8 x 15) Connect part E with parts G and part D by screw (M 8 x 15), Connect parts F with parts G and part D by screw (M8 x 15).
Page 5
Assembled Log Splitter stand THLSS-B with The Handy Log splitter THLS-B Carefully fit the log splitter to your fully assembled stand, use the screws and nut supplied (part list items 4-1 & 7, M8 X 50 & M8) to secure the log splitter to the stand.