Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
7. Connect air supply hose to the male plug. Set
the working pressure at 90 PSI for best tool
performance.
NOTE
Working pressure refers to the air line
pressure set to tool when tool is under working
conditions.
OPERATING INSTRUCTIONS
1/2 IN. AIR IMPACT WRENCH
1. How to install/tighten threaded fasteners.
Push the switch (D1) forward and have the
arrow on the switch (D1) pointing at either of
the settings 1, 2, 3 as shown. Press the trigger
(C1). The tool anvil (B1) runs clockwise.
2. How to remove/loosen threaded fasteners.
Push the switch (D1) backward and have the
arrow on the switch (D1) pointing at "R" position
as shown. Press the trigger (C1). The tool anvil
(B1) runs counterclockwise.
7
1
2
20
Advertisement
Table of Contents
