Preparation; Operating Instructions - Kobalt KMT 224B-03 Manual

PREPARATION

Know Your Multi-Tool
Before attempting to use the multi-tool, familiarize yourself with all of its operating features and
safety requirements.
WARNING
• Do not allow familiarity with the multi-tool to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be
sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.

OPERATING INSTRUCTIONS

To prevent accidental activation of the tool, push the lock on/off button (E) all the way to the left
or to the right to lock the trigger off before attaching or detaching the battery pack.
1. To Attach Battery Pack
a. Align the raised portion of the battery pack with
the grooves on the bottom of the tool, and then
slide the battery pack onto the tool as shown.
b. Make sure that the latch on the battery pack
snaps into place and the battery pack is
secured to the tool before beginning operation.
NOTICE: When placing the battery pack on the tool,
be sure that the raised rib on battery pack aligns
with the groove on the tool and the latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release
the battery pack.
b. Pull backward on the battery pack to remove it from the tool.
2. Lock On/Off Switch
When the variable-speed trigger switch (F) is not
depressed, pushing the lock on/off button (E) fully
to either side until it snaps into place will lock the
trigger switch and disable it from being depressed.
a. To turn on the tool, place the lock on/off
button in the center position then depress the
variable-speed trigger switch.
b. To turn off the tool, release the variable-speed
trigger switch.
NOTICE: The trigger switch delivers higher speed
with increased trigger pressure and lower speed
with decreased trigger pressure.
1
2
8
Battery-release buttons
E
F