Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
3. Place 2 - 3 drops of air tool oil into the male
plug before each use.
4. Mount the 3/8 in. to 1/2 in. adapter onto the
anvil (B2) if necessary, and then choose the
correct impact socket as needed and mount it
onto the adapter.
Only use impact sockets that have an RPM
rating equal to or greater than the tool itself.
5. Connect air supply hose to the male plug. Set
the working pressure at 90 PSI for best tool
performance.
NOTE
Working pressure refers to the air line
pressure set to tool when tool is under working
conditions.
WA R N I N G
3
4
5
15
Advertisement
Table of Contents
