Table of Contents
Advertisement
Move handle down to fold the e-scooter
Move handle up to unfold the e-scooter
The knob must be set to RIDING when riding for safety issue to prevent unintended folding the e-
scooter.
Handlebar assembly
3.
1)
Parts inside the packaging: two handlebars
2) Change display angle: Loosen screw
handlebar meter screen upwards while the
level. Remember to tighten screws again
3) Before operating the E-scooter, turn
the handlebar grips and carefully check
all the components to make sure that the
steering is correctly installed as
described above, and that all connecting
parts are secure and fully functional.
on the handlebar, rotate the axle
and display screen turn inwards in a horizontal
to make the
Advertisement
Table of Contents
